DVR & CCTV Camera Switching Power Supply Battery Back up System

Features Low cost, high reliability, coling by free air convection, easy handling, compact size, and light weight and wide input range.  

Features:

Low cost, high reliability, cooling by free air convection, easy handling, compact size, and light weight and wide input range.

AC Input Supply
Single Phase: 170 - 264 Vac 50Hz
DC Output Voltage
12Vdc 4A. 8A & 12A
24Vdc 4A. 8A & 12A

Applications:

CCTV Camera System
Standalone DVR system
Door Access System

System Protection:

Short circuit / Overload
Current limiting, auto recovery

Load output protection:

Protected by individual 3A fuses
Indicator by green LED’s

Environmental:

Temperature: 0 degree to 50 degree celsius
Humidity: 0 to 95% relative humidity

Safety Standards:

Design refer to UL 1012 (power supply only)

EMC standards:

Design refer to FCC part 15J (power supply only)

Enclosure:

Mild sheet metal threated with chemical rust inhibitor and rust resisting primer coat and finally paint with epoxy powder forms the enclosure.

Dimensions:

W=242mm , H=120mm , D=80mm

   

posted : Thursday, February 10th, 2011

Door Access Power Supply

1. The Features:
Linear battery charger always on float charge and
therefore effectively protected against overcharging and the battery can remain permanentely
connected to the charger and automatically charge the maintenance
free sealed lead acid battery and back-up after interruption of AC supply from utility.
Built in low voltage cut-off feature, easy handling, compact size and light weight.

2. Standard three LED’s for status indication:
Green LED : Mains AC supply available (Mains on)
Green LED : Battery are connected to charger or charging are available (Battery in or Charge)
Green LED : Load are feed to equipment (Load output)

3. Applications:
> Emergency back-up system for Reader, EM Lock & CCTV camera

4. Back-up time (base on 12V7AH SLA Battery end voltage 10.8V):
* Back-up up to 4 to 5 hours for 1 Reader + 1 EM Lock (600ibs ) 3922 & 3923 standard casing
* Back-up up to 2 to 3 hours for 1 Reader + 2 EM Lock (600ibs+ 600ibs)
* Back-up up to 3 to 4 hours for 2 Reader + 1 EM Lock (600ibs)
* Long battery back-up also available up on require

5. Protection:
(a) The battery charger is protected against overload
(b) Battery and Load output by fuses.

6. Enclosure:
Mild sheet metal threated with chemical rust inhibitor and rust resisting primer coat and finally,
painted with epoxy powder forms the enclosure.

7. Environmental:
Temperature : 10 degree to 40 degree celcuis,
Humidity : 0 to 95 % relative humidity

8. The functions:
(a) To power on the reader and electromagnetic lock when power source failure
(b) To support rechargeable backup battery (compatible with 12V rechargeable backup battery).
and to act as a backup power supply in the event of power soucre failure.

9. The Design:
(a) Low voltage Dis-connected feature (standard feature)
(b) Door Lock Timer Control (Built IN door excess controller)
(c) Door Exit Push Button control (Built IN door excess controller)

posted : Thursday, February 10th, 2011

Solar Powered Warning Flashing Light

Description:

  1. Powered by Multi-crystalline Silicon (MCS) and Amorphous Silicon suitable for severe   weather condition.
  2. Solar charger controller with High voltage and low voltage protection.
  3. Working temperature range -20ºC to 50ºC.
  4. High efficiency solar module design lifetime 15 years.
  5. High efficiency Amber L.E.D Light.
  6. L.E.D lights for prolong lifespan of 100,000 hours with constant current control.
  7. Maintenance free sealed lead acid (M.F.S.L.A) battery deep cycle battery with minimum 5 days backup.
  8. 4 to 10 meters hot dipped galvanized steel pole * option.
  9. Outdoor type IP65 casing.
  10. Emergency flashing light provide easy installation and minimum maintenance.
  11. Application: Danger corner road side, road construction site and hazardous area.


Advantages of using Solar Powered Systems:

  • Free energy from sun light
  • Environmental friendly (green energy)
  • No electricity bill
  • No costly cabling
  • No diesel generator, No fuel cost
  • No Smoke, No pollution
  • Less maintenance


Dimension: H360XW360XD500mm
Maximum Weight: 10kg
Voltage:
12V Vdc

Technical Specifications:

Model:                                SUN Flash 200                   SUN Flash 300
L.E.D:                                  5 mm L.E.D                        5 mm L.E.D
Colour:                               Amber light                         Amber light
Solar panel:                        12V8 Watt MCS X 1 panel 12V8 Watt MCS X 1 panel
Backup time:                      5 day autonomy with 24hours daily operation
Solar charger controller:   suncon1210                      suncon1210
Battery (M.F.S.L.A.B):        12V7AH MFSLA               12V7AH MFSLA
Dimension diameter:         200mm2                            300mm2

* Sunpower Technologies sdn bhd reserves the right to change specifications without prior notice.

posted : Thursday, February 10th, 2011

Solar Powered LED Flood Light

Description:

  1. Powered by Multi-crystalline Silicon (MCS) and Amorphous Silicon suitable for extreme weather conditions.
  2. Solar charger controller with High voltage and low voltage protection.
  3. High efficiency power L.E.D 65 lumen/w.
  4. L.E.D lights for prolong lifespan of 100,000 hours with constant current control.
  5. Dimmer function after midnight for saving energy.
  6. Maintenance free sealed lead acid (M.F.S.L.A) battery deep cycle battery with minimum 5 days backup.
  7. 4 to 10 meters hot dipped galvanized steel pole * option
  8. Outdoor type IP65 Floodlight
  9. Thermal resistant with tempered glass
  10. Is an innovative asymmetrical floodlight suitable for general and specific lighting   application.
  11. The high pressured aluminum die-cast housing coated with epoxy powder provides superb weather resistant.
  12. Application : Shop-windows, Palaces, Sports centers, Advertisement billboards and Carparks.
  13. Floodlight provide easy installation and minimum maintenance.


Dimension: 430X230X85mm
Maximum Weight: 5kg
Voltage: 12V or 24Vdc

Technical Specifications:

Model:                               SUN 80LED09                       SUN160LED15
L.E.D:                                 1W power L.E.D                   1W power L.E.D
Lumens:                            585lm (2100mA)                 975lm (3500mA)
Solar panel:                       12V80 Watt MCS X 1 panel  12V80 Watt MCS X 2 panel
Backup time:                     5 day autonomy with 12hours daily operation
Solar charger controller:   suncon1210                        suncon1210
Battery (M.F.S.L.A.B):        12V65AH MFSLA                 12V100AH MFSLA

* Sunpower Technologies sdn bhd reserves the right to change specifications without prior notice.

posted : Thursday, February 10th, 2011

Solar Powered LED Street Light

Description:

  1. Powered by Multi-crystalline Silicon (MCS) and Amorphous Silicon suitable for extreme weather conditions.
  2. Solar charger controller with High voltage and low voltage protection.
  3. High effieciency power L.E.D 65 lumen/w.
  4. L.E.D lights for prolong lifespan of 100,000 hours with constant current control.
  5. Dimmer function after midnight for saving energy.
  6. Maintenance free sealed lead acid (M.F.S.L.A) battery deep cycle battery with minimum 5 days backup.
  7. 4 to 10 meters hot dipped galvanised steel pole * option
  8. Outdoor type IP65 Floodlight.
  9. Thermal resistant with tempered glass.
  10. Is an innovative asymmetrical floodlight suitable for general and specific lighting   application.
  11. The high presure aluminium die-cast housing coated with epoxy powder provides
  12. Floodlight provide easy installation and minimum maintenance.
  13. Application: Shop-windows, Palaces, Sports centers, Advertisement billboards and Carparks.

Dimension: 430X230X85mm
Maximum Weight:
5kg
Voltage:
12V or 24Vdc

Technical Specifications:

Model:                                   SUN 80LED09ST                  SUN160LED15ST
L.E.D:                                     1W power L.E.D                   1W power L.E.D
Lumens:                                585lm (2100mA)                   975lm (3500mA)
Solar panel:                          12V80 Watt MCS X 1 panel   12V80 Watt MCS X 2 panel
Backup time:                        5 day autonomy with 24hours daily operation
Solar charger controller:     suncon1210                          suncon1210
Battery (M.F.S.L.A.B):          12V65AH MFSLA                   12V100AH MFSLA

* Sunpower Technologies sdn bhd reserves the right to change specifications without prior notice.

posted : Thursday, February 10th, 2011